PPAP DOCUMENT AVAILABLE
Specifications :Brass Inserts, Standoofs, Rivet Nuts, Thread Inserts, Male Female Standoffs / Spacers, Self Clinching Nuts, Clinching Studs, CD Studs
Materials :Brass Inserts, Standoofs, Rivet Nuts, Thread Inserts, Male Female Standoffs / Spacers, Self Clinching Nuts, Clinching Studs, CD Studs
Sizes :Brass Inserts, Standoofs, Rivet Nuts, Thread Inserts, Male Female Standoffs / Spacers, Self Clinching Nuts, Clinching Studs, CD Studs
Standoffs and Spacers ( Threaded & Unthreaded, Standard & Metric )
Male to Female Standoffs / Male to Male Standoffs / Female to Female Standoffs
Thumbscrews
Specifications :Clinching Fasteners
Materials :Clinching Fasteners
Sizes :Clinching Fasteners
Clinching Studs Broaching Studs
Specifications :Clinching Studs Broaching Studs
Materials :Clinching Studs Broaching Studs
Sizes :Clinching Studs Broaching Studs
JIS, DIN, IFI, Customized
RoHS
Specifications :Rivets / Washers / Anchors / Pins
Materials :Rivets / Washers / Anchors / Pins
Sizes :Rivets / Washers / Anchors / Pins
Clinch Nuts
Specifications :Clinch Nuts
Materials :Clinch Nuts
Sizes :Clinch Nuts
JIS, DIN, IFI, Customized
RoHS
Specifications :Screws / Bolts
Materials :Screws / Bolts
Sizes :Screws / Bolts
Screws / Bolts
Specifications :Screws / Bolts
Materials :Screws / Bolts
Sizes :Screws / Bolts
Electronics Screws
Specifications :Electronics Screws
Materials :Electronics Screws
Sizes :Electronics Screws
RoHS
Types
Self Clinching Studs and Pins
MFFH : Flush Head for sheet thickness of 1mm or over.
MFTFH : For sheets as thin as 0.51mm.
MFHFH : High-strength applications. Sheets as thin as 1.3mm.
MFFHL : For installing to the edge of a sheet and the sheet thickness of 1mm or over.
MFFH4 : Installing into stainless steel sheets as thin as 1mm, and HRB of 92 or less.
MFTPS : Flush-mounted, pilot pins with chamfered end. Application: positioning, pivot, and alignment.
MFHFE : Enlarged head diameter. High strength. Sheets as thin as 1 mm.
MFFHD, MFHFHD, MFHFED : Dog Point and Anti Cross-Threading (Options For Studs) :Allowing quick location of the mating fastener.
Self-Clinching Flush Nuts
Shanks code from 1~5, shanks max. from 1.53~4.63mm, for sheet thickness from 1.53~up.
Self Clinching Nuts
MFS / MFSS : Applies for steel or aluminum sheets HRB 80 or less.
MFCLS / MFCLSS : Applies for steel or aluminum sheets HRB 70 or less.
MFSP : Applies for stainless steel sheets HRB 90 or less.
MFCLA : Applies for aluminum sheets HRB 50.
MFSMPS : Applies for sheets as thin as 0.64mm, HRB 70 or less.
Self Clinching Locknuts
MFSL : 3 locking, applies for sheets HRB 80 or less.
Self Clinching Standoffs
MFS04 : Through hole threaded stnadoffs, applying for Stainless Steel sheets.
MFBS04 : Blind threaded standoffs, applying for Stainless Steel sheets.
MFSO, MFSOA, MFSOS : Through hole threaded standoffs.
MFBSO, MFBSOA, MFBSOS : Blind threaded standoffs.
MFSO, MFSOA, MFSOS : Through hole unthreaded standoffs.
MFTSO, MFTSOS, MFTSOA : Threaded standoffs for sheets as thin as 0.63mm.
MFDSO, MFDSOS : Threaded standoffs for edges of sheets.
Specifications :Standoffs
Materials :Standoffs
Sizes :Standoffs
JIS, DIN, IFI, Customized
RoHS
Specifications :Nuts
Materials :Nuts
Sizes :Nuts
CD Weld Studs Welding Gun
Specifications :CD Weld Studs Welding Gun
Materials :CD Weld Studs Welding Gun
Sizes :CD Weld Studs Welding Gun
Washer
Specifications :Washer
Materials :Washer
Sizes :Washer
RoHS
Screw Sert Inserts & Studs
Types
MFSCT : Inserts / MFHSCT: Headed Inserts
Threaded Inserts
Types
MF46 - Short: Single Vane Series / Double Vane Series MF46 - Long
MFSL: Inserts / MFSHK: Headed Inserts
MFTEC: Inserts
MFMTEC: Inserts / MFMTH: Headed Inserts
MFSP: Inserts / MFHSR: Headed Inserts
MFFTC: Inserts
MFFL: Inserts / MFFLH: Headed Inserts
MFPLK: Inserts
MFN41: Inserts / MFN42: Headed Inserts / MFN42R: Reverse Inserts
MFHL: Inserts / MFHLH: Headed Inserts
MFARB: Anchor Rivet Bush (ARB) / MFARBSO: Anchor Rivet Bush StandOffs
MFMINARB: Anchor Rivet Bush
MFPHI: Headened Inserts
Specifications :Screw Sert Inserts / Threaded Inserts
Materials :Screw Sert Inserts / Threaded Inserts
Sizes :Screw Sert Inserts / Threaded Inserts
JIS, DIN, IFI, Customized
RoHS
Types
Wheel Locking Bolts
Wheel Locking Nuts
Acorn Locking Bolts
Wheel Locking Nuts - MAG
Wheel Bolts - Cone Seat
6-Spline tuner locking nuts
Hex Socket Lung Bolts & Key
Flange Lug Nuts - One Piece
Flange Lug Nuts - One Piece
Flange Lug Nuts - Two Piece
Acorn Lug Nuts - open end
Flange Lug Nuts with Washer
Acorn Lug Nuts - Two Piece
Lug Nuts with Washer
Hex Socket Lug Nuts & Key
Special Fine Tuned Socket Locking Nuts & Key
Special Parts
Special Fasteners & Parts
Automative Screw Machine Parts
Specifications :Automative Wheel Nuts & Bolts
Materials :Automative Wheel Nuts & Bolts
Sizes :Automative Wheel Nuts & Bolts
Standoffs
Specifications :Standoffs
Materials :Standoffs
Sizes :Standoffs
Thread Inserts, Self-clinch Fasteners
Specifications :Thread Inserts, Self-clinch Fasteners
Materials :Thread Inserts, Self-clinch Fasteners
Sizes :Thread Inserts, Self-clinch Fasteners
Clinching Studs Broaching Studs, Brass Inserts, Standoffs, Thread Inserts, CD Weld Studs, Clinch Nuts, PT Screws, Male/Female Standoffs Spacers
Specifications :Clinching Studs Broaching Studs, Brass Inserts, Standoffs, Thread Inserts
Materials :CD Weld Studs, Clinch Nuts, PT Screws, Male/Female Standoffs Spacers
Sizes :Clinching Studs Broaching Studs, Brass Inserts, Standoffs, Thread Inserts
